Beko BA 110 AC Manuel D'utilisation page 27

4 Installation
Parts
4.5 Window installation kit
Step one: Preparing the exhaust hose assembly
press the exhaust hose into the window slider adaptor and unit adaptor, clamp automatically by
elastic buckles of the adaptors.
Step two: Install the exhaust hose assembly to the unit
Insert unit adaptor of the exhaust hose assembly into the lower groove of the air outlet of the unit
while the hook of the adaptor is aligned with the hole seat of the air outlet and slide down the exhaust
hose assembly along the arrow direction for installation.
Portable air conditioner / Instruction Manual
Description
Bolt
Security Bracket and Screw
Drain Hose
Drain Hose Adaptor (only for
heat pump mode)
Foam Seal A (Adhesive)
Foam Seal B (Adhesive)
Foam Seal C (Non-adhesive)
Remote Controller and Battery
Exhaust hose
Press into Press into
Window slider
Unit adaptor
adaptor
Quantity
1 pc
1 set
1 pc
1 pc
2 pc
2 pc
1 pc
1 set
Exhaust hose
assembly
27 / 92 EN