Amplifier Section; Specifications - Yamaha CRX-E300 Mode D'emploi

ADDITIONAL INFORMATION

Amplifier section

Minimum RMS output power per channel
................................................ 25 W + 25 W (6Ω 1kHz 0.1% THD)
DIN Standard output power per channel (Europe model)
................................................ 28 W + 28 W (4Ω 1kHz 0.7% THD)
Input sensitivity/Impedance
TAPE/MD/AUX ........................................................ 170 mV/47 kΩ
Frequency response
MD etc. .................................................... 20 Hz to 20 kHz, ±0.5 dB
Total Harmonic Distortion (20 Hz to 20 kHz)
MD etc. 12.5 W, 6 Ω ............................................................... 0.04%
Signal-to-Noise ratio (IHF-A Network)
MD etc. (250 mV, Input shorted) ............................................ 98 dB
Output level/Impedance
REC OUT ................................................................. 170 mV/1.2 kΩ
SUBWOOFER ............................................................. 2.0 V/1.2 kΩ
PHONES ..................................................................... 0.35 V/270 Ω
Tuner section
Tuning range
FM
[U.S.A. and Canada models] ................................ 87.5 – 107.9 MHz
[U.K., Europe, Australia, Korea and General models]
.......................................................................... 87.50 – 108.00 MHz
AM
[U.S.A. and Canada models] ................................... 530 – 1710 kHz
[U.K., Europe and Australia models] ...................... 531 – 1611 kHz
[Korea and General models] .................... 530/531 – 1710/1611 kHz
Sensitivity
FM (IHF, MONO) .................................................................. 1.0 µV
AM .................................................................................... 300 µV/m
26

Specifications

CD player section
D/A converter ...................................................................... S-bit DAC
Laser diode properties
• Material: GaAIAs
• Wavelength: 780 nm
• Emission duration: continuous
• Laser output: max. 44.6 µW*
* This output is the value measured at a distance of about 200 mm
from the objective lens surface on the Optical Pick-up Block.
General
Power supply
[U.S.A. and Canada models] ................................. AC 120 V, 60 Hz
[Australia model] ................................................... AC 240 V, 50 Hz
[U.K. and Europe models] ..................................... AC 230 V, 50 Hz
[General model] .......................... AC 110/120/220/240 V, 50/60 Hz
[Korea model] ................................................. AC 110/220 V, 60 Hz
Power consumption
[U.S.A. and Canada models] .................................................... 70 W
[U.K., Europe, Australia, Korea and General models]...............85 W
Power consumption (standby mode)
[U.S.A. and Canada models] ................................................. 0.65 W
[U.K., Europe and Australia models] ...................................... 0.9 W
Dimensions (W x H x D) ..................................... 217 x 168 x 312 mm
Weight ........................................................................................ 5.0 kg
Specifications are subject to change without notice.