Publicité
Les langues disponibles
Les langues disponibles
HOW TO ASSAMBLE THE CREAM SEPARATOR
1.
Put the housing on a desk or other plain and stable surface.
2.
Put assembled top bowl on the rubber cone fixed on the end of the motor shaft.
Knock slightly on top of the bowl so that it sticks securely on the cone.
3.
Put milk funnel (conical shape) on the top of the outlet holder and then also cream
funnel (concave shape) on the top of previous one.
4.
Turn top bowl with hand and check if it is not touching on the funnels and adjust funnels to
desired position for skimming.
5.
Place the container holder on the top of both funnels. Place floating device in it. Then
place container on the container holder. Fix all parts together by fixing part with handle.
6.
Place closing cork in the hole situated in the middle of milk container. The horizontal bar of
the closing cork handle must be turned away from the cut in the container (see picture). The
milk outflow will be closed.
Cut on the container:
1. Open
2. Closed
Fixing hooks
THE CLOSING CORK MUST BE CLOSED WHEN YOU FILL THE CONTAINER WITH
MILK. THIS MEANS, THAT THE END OF THE CLOSING CORK HANDLE MUST BE
TURNED TO OPPOSITE DIRECTION OF THE CUT IN THE CONTAINER.
17
Publicité
