Publicité
Les langues disponibles
Les langues disponibles
Connection process between remote control and cooker hood
Within 15S after the cooker hood connects to the power supply, long press
5 seconds, the indicators light begin flashing from one button to another ,the
cooker hood is in connection mode, press any button on remote control to confirm
the connection. The connection process finished and the remote control can be
used for speed selection, lighting and timer setting.
If you want to connect again, you will need to clear the code that has been set up
previously.
To clear the code, press
one button to another, the cooker is in connection mode. Then, press
for 3-5 seconds, the previous connection code is cleared.
When the previous code has been cleared, the cooker hood back to standby mode,
press
for 5 seconds, the indicate light flashing from one button to another ,the
cooker hood is in connection mode, then, press any button on remote control to
confirm the connection.
Remote control
1. Lighting
press button once, the light is on, press again, the light is off. The lighting
button it is controlled separately and will not affect any other functions.
2. Turning on/ Increasing motor speed key
3 levels.
2.1 Press
2.2 When the hood works at low speed, touch
mid speed.
2.3 Base on the middle speed condition, touch
the high speed.
2.4 Base on the high speed condition, touch
for 5 seconds, the indicators light begin flashing from
one time,the motor will work at low speed (Turning on).
, the motor has low, mid, high totally
again,the motor changes to
again, the motor is running in
again,the hood still works at high
22
for
again
Publicité
