Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION (VENT OUTSIDE)
If you have an outlet to the outside, your cooker hood can be connected as below
picture by means of an extraction duct (enamel, aluminum, flexible pipe or inflammable
material with an interior diameter of 150mm)
1. Before installation, turn the unit off and unplug it from the outlet.
2. The cooker hood should be placed at a distance of 65~75cm above the cooking
surface for best effect.
3. Drill 4pcs φ8 mm holes in the wall at a suitable place to fix inside chimney bracket
and hood body once the installation height is fixed, and keep it in line. The installation
position of the inside chimney bracket is the highest position of the inside chimney.
see Pic 2.
4. Insert wall plugs into the holes that you have drilled for the cooker hood body, fasten
the hood body with 2 × support screw ST4*30 mm halfway in, leaving them 2 mm out
of the wall,then use 2pcs ST4*40mm screws to fix the inside chimney bracket.See Pic
2.
5. Install the expansion pipe onto the cooker hood by screws, see Pic 3.
19
Publicité
