livin flame Noville Manuel De Montage Et Mode D'emploi page 18

3.2 Operating by Remote Handset
•
Make sure the batteries are installed properly in the remote control.
•
The effective range of the remote control is up to 15 meters or 49 feet.
NOTE: This is a thermostatic remote control. The remote should be in the same room as fireplace and
placed on a flat surface. It must be placed away from the heater so the hot air will not blow on it and
affect thermostatic reading.
The communication frequency between the fire and remote has already been set up. If you cannot use
the remote with the fire, please follow instructions Step 3.2.16 to initiate this connection in point.
Turn on/off
3.2.1 Press to turn the flame and fuel bed effect on or off.
3.2.2 Press to turn off the auto mode when the heater is in Heating AUTO mode.
Flame Effect
3.2.3 Press turn the flame on/off.
3.2.4 Press the '←' and '→' button to select the 3 kinds of flame effect or OFF.
3.2.5 Press the '+' and '-' button to select the 5 brightness of flame effect and OFF settings.
All manuals and user guides at all-guides.com
18