Interline 59695310 Manuel D'instructions page 52

4.7 Fault Display:
When the unit has a fault, the fault flashes in the timing area, the cycle shows the fault code
and the corresponding fault unit, when the fault is eliminated, it return to normal display.
4.8 Clock / Timer Setting:
Press shortly to confirm and set the next.
Press to exit the setting without save.
Press and hold 3 seconds, the hour part of the clock area flashes, indicating the clock
setting state. Press
let the minute area flashes. Press
Press again or none operation over 1 minute to exit setting.
Timer 1 Setting: Press
The "ON" icon is displayed, and the hour display area flashes, press
hour of unit turn on timing. Press
Press shortly to keep going and set the next. Start to set the unit turn OFF timing when the
icon "OFF" is displayed. Press
Timer 2 Setting: Press
The control of Timer 2 Setting same as Timer 1 Setting.
Cancel the Timer Setting: Press
control of Timer 1 or 2 Setting.
4.9 Ice Defrost Manually:
Press and
is running. confirm and set the next. The controller will determines whether to enter the manual
defrosting function according to the conditions.
DI SPLAY AN D OPERAT I ON
or to adjust the hour when hour is flashing. Press
or
and at the same time for 3 seconds to enter timer 1 setting.
again to set the minute of unit turn on timing.
or or
and at the same time for 3 seconds to enter timer 2 setting.
and hold 3 seconds to cancel the timer setting during the
at the same time for 3 seconds to start ice defrosting manually if the unit
to adjust the minute when minute is flashing.
to adjust the time and confirm setting.
EN EN
again to
or to adjust the