Publicité
Les langues disponibles
Les langues disponibles
Do not connect the power cord to an intermediate point, use an extension cord, or connect multiple devices to heat pump.
• This may cause overheating, fire, or electric shock.
Make sure the power plug is free of dirt and insert it securely into the outlet.
• A dirty plug may cause fire or electric shock.
Do not bundle, pull, damage, or modify the power cord, and do not apply heat or place heavy objects on it.
• This may cause fire or electric shock.
Do not turn the breaker OFF/ON or disconnect/connect the power plug during operation.
• This may create sparks, which can cause fire.
Do not expose your body directly to cool air for a prolonged length of time.
• This could be detrimental to your health.
The unit should not be installed, relocated, disassembled, altered, or repaired by the user.
• An improperly handled heat pump may cause fire, electric shock, injury, or water leakage, etc. Consult your dealer.
• If the power supply cord is damaged, it must be replaced by the manufacturer or its service agent in order
to avoid a hazard.
When installing, relocating, or servicing the unit, make sure
that no substance other than the specified refrigerant (R32)
enters the refrigerant circuit.
• Any presence of foreign substance such as air can cause abnormal
pressure rise and may result in explosion or injury.
• The use of any refrigerant other than that specified for the system
will cause mechanical failure, system malfunction, or unit breakdown.
In the worst case, this could lead to a serious impediment to securing product safety.
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance
by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
The appliance shall be stored in a room without continuously operating ignition
sources (for example: open flames, an operating gas appliance or an operating electric heater).
Do not insert your finger, a stick, or other objects into the air inlet or outlet.
• This may cause injury, since the fan inside rotates at high speeds during operation.
In case of an abnormal condition (such as a burning smell),
stop the heat pump and disconnect the power plug or turn the breaker OFF.
• A continued operation in the abnormal state may cause a malfunction,
fire, or electric shock. In this case, consult your dealer.
When the heat pump does not cool or heat, there is a possibility
of refrigerant leakage. If any refrigerant leakage is found,
stop operations and ventilate the room well and consult your
dealer immediately. If a repair involves recharging the unit with
refrigerant, ask the service technician for details.
• The refrigerant used in the heat pump is not harmful. Normally,
it does not leak. However, if refrigerant leaks and comes in contact
with fire or heating part of such a fan heater, kerosene heater, or
cooking stove, it will create harmful gas and there is risk of fire.
WARNING
EN
Publicité
