Velleman CAMSETW8 Mode D'emploi page 3

1.
2.
Remarks:
• Press to select one channel.
• Press to scan channels automatically
• Press or
• Press once after the setting is done to lock the remote control against unintentional touching or interference
from other IR remote controls. The icon " " is now displayed; the keys on the remote control no longer work when
the remote is locked. Just press
8. Camera Channel Set-up
The channel number for the camera is printed on the camera. Use the channel button to select the same channel for
the receiver as for the camera. The image is now displayed on the TV.
9. General Guidelines
• Protect the device against water and don't put objects containing water (e.g. vases) on top of the device
Turn off the camera/receiver if the system is not in use.
•
Use the adapter to connect /disconnect the device with/from the mains.
•
Do not cut off the DC power cable to try and use it with a different power source
•
10. Specifications
Operating temperature
Storage temperature
Operating humidity
Camera
Imaging sensor
Total pixels
Viewing angle
Transmission frequency
Transmission power
Modulation type
Bandwidth
Power supply
Effective range (line of sight)
Consumption current
Night vision range
Dimensions (W x D x H)
Weight
CAMSETW8
scanning for all available channels
lock or unlock the keys of the remote
control
to stop scanning the channels.
to unlock the remote again (" " is displayed).
-10 to +50°C/ +14 to +122°F
-30 to +85°C/ -22 to +185°F
85% RH
CMOS
628 x 582 (PAL); 510 x 492 (NTSC)
62°
2.400 to 2.483MHz
10mW/CE; 2mW/FCC
FM
18MHz
8V DC
100m (under ideal circumstances)
80mA & 120mA (IR ON)
7m
Ø 44 x 56mm (without bracket)
220g
1. Press loop key once to start
2. Press loop key again to confirm
In normal mode, press once to lock,
" " flashes; press again to unlock, " "
flashes
3
and scanning begins
VELLEMAN