Montipower BRISTLE BLASTER Mode D'emploi page 4

EN Operating instructions
Dear customer!
®
MontiPower thanks you for the purchase of one of its products and invites you to read these
operating instructions, which contain all the necessary information for the correct use of the
tool. Please read these instructions carefully and follow the information contained herein. Please
maintain the manual in good condition and keep it with the tool at all times. The contents of
this manual may be changed without notice and without the implication of any additional
obligations. It is prohibted to copy or translate any part of this manual without the prior written
consent of the manufacturer.
Technical Data: Bristle Blaster
These technical specifications apply equally to the 110 V - 240 V versions, whether these
versions are 50 Hz or 60 Hz.
Specifications
Weight
Belt diameter (outer)
Output
Idle speed (±5%)
Vibration
Sound pressure level
*2) 2014/30/EU, 2006/42/EC, 2011/65/EU
*3) EN 60745-1:2009+A11:2010, EN 60745-2-3:2011+A2:2013+A11:2014+A12:2014
Original instructions
1. Declaration of Conformity
We declare under our sole responsibility the Bristle Blaster
*1), comply with all relevant requirements of EU Directives *2) and standards *3)
2. Specified Use
The machines, with original MontiPower
simultaneously cleaning and creating an achor profile.
The user bears sole responsibility for any damage caused by improper use. Generally accepted
accident prevention regulations and the enclosed safety information must be observed.
4
®
Electric (*1) Serial number)
Value Unit
3.0 kg | 6,6 lbs
110 mm
910 W
2,400 rpm
4 m/sec
< 80 dB(A)
®
accessories, are intended for use in surface preparation,
BRISTLE BLASTER
2
®
, identified by type and serial number
®
ELECTRIC SINGLE