Nosiboo Go Guide De Démarrage Rapide page 9

CLEANING
Detach the Penguin head in the following order:
Wash the parts with
*
liquid soap and
lukewarm water.
You can soak the
*
parts in a disinfection
liquid, just make sure
the liquid is safe to
use for baby
equipment.
Let the parts
*
dry completely
before the next use.
It is not allowed to use a dishwasher,
*
boiling water, microwave oven,
vaporizer or baby bottle sterilizer for
cleaning the spare parts because
they might deform by heat!
Use the brush to
clean the nose tip.
The air mesh is there to prevent solid
*
objects and dust from entering the
housing.
The air mesh is not there to absorb
*
any mucus or liquid.
If the air mesh is dirty or clogged,
*
replace it.
It can function well for a very long time
*
next to the proper usage of the device.
Clean the housing with a dry, soft cloth.
*
Do not use any liquids, detergents or
*
chemicals.
Keep the device in a place where it is
*
protected from dust, direct sunlight
and heat.
HINTS & TIPS
The Penguin head must be assembled
*
and disassembled in the right order.
Do not cover the vents on the back of
*
the device while in use.
Dry, very thick mucus can be dissolved
*
by a mild saline solution. After using it,
wait a few minutes, wipe excess discharge
with a tissue, then reuse the nasal aspirator
as directed.
Do not use more than 5 ml of saline
*
solution at once.
The device should only be used
*
by adults.
Do not allow children to play
*
with the device, it is NOT A TOY.