Pioneer PDP-503HDE Mode D'emploi page 31

Basic adjustment settings
MENU
Decoder menu
Programme Setup "Manual"
01 SAT.1
02 PRO7
03 KABEL
Programme Setup "Manual"
01 SAT.1
02 PRO7
03 KABEL
29
ENTER
/ / /
Decoder
Lock menu
Lock
Setting the decoder
When connecting a decoder to, you need assign the
terminal input.
On Programme Setup "Manual" menu
1
Press / / /
edit, and then press ENTER.
• The selected channel information displays.
2
Press /
ENTER.
• Terminal inputs are displays.
3
Press /
press ENTER.
A
• "Off" is factory preset value. When set to "Off", you cannot
watch any image from decoders.
• Return to the previous menu by pressing n.
• Exit the menu by pressing MENU.
Off
INPUT1
INPUT2
INPUT3
Setting the child lock
You can block the viewing of any channel.
On Programme Setup "Manual" menu
1
Press / / /
Off
edit, and then press ENTER.
On
• The selected channel information displays.
2
Press / to select "Lock", and then press ENTER.
• Child lock menu displays.
3
Press /
ENTER.
A
• Even if set to "On", this function never works if not setting
password, See page 54 for the details on password
setting.
• Return to the previous menu by pressing n.
• Exit the menu by pressing MENU.
to select the channel you want to
to select "Decoder", and then press
to select an INPUT terminal, and then
to select the channel you want to
to set "Lock" to "On", and then press