PACLITE Equipment M600NH Manuel De L'opérateur page 10

M600NH / M700 / M900 / M900-CC / M1200-CC
Make a visual inspection to ensure the blades are free of obstructions and the area is clear for operation.
OPERATING THE TROWEL
Get in into the operator's position behind the centre of the handle and get a good footing. Then apply the throttle
slowly until the desired speed is obtained. The blades of the Paclite trowel spin in a clockwise direction.
• Pushing the handle down will steer the machine to the right.
• Lifting the handle up will steer the machine to the left.
• Twisting the handle slightly to the right will move the machine forwards.
• Twisting the handle slightly to the left will move the machine backwards.
• Holding the handle in the neutral position will keep the machine stationary.
PREPARATION OF CONCRETE SURFACE
The use of a mechanical or an air-vibration screeding machine to produce a level concrete surface which will
provide good compaction to the slab and produce an ideal surface for fi nishing. It should be remembered
fi nishing machines will not repair or correct a poorly screeded slab.
10
Operation