Publicité
Les langues disponibles
Les langues disponibles
Instructions for use for the user
9.8. Activating standby for remote operation
EN 60335-2-53 specifies that sauna control units with a remote start function
must be set manually to "Standby for remote operation" mode. This activation
must take place again after each remote start and stop procedure. To do so,
perform the following steps:
1. Press the temperature selector
► The remote start indicator 8 starts flashing.
► The sauna control unit is then ready to be started and stopped using
a remote start signal.
► After a remote start and stop, the remote start indicator goes out and the
mode has to be activated again.
for one second.
3
p. 31/38
EN
Publicité
