Publicité
declares under our sole responsibility that the
Product:
Models:
Description
covered by this declaration is in conformity with the following directive(s), standard(s) or other
normative document(s), provided that the product is used in accordance with our instructions.
Directive
2014/34/EU
Reference Number
EN IEC 60079-0:2018
EN 60079-11:2012
EN 60529:1991 + A1:2000+A2:2013
Notes
:
The pressure controlled pilot valve must be used in accordance with its specifications, especially (but not limited
to) electrical, pressure, temperature, shock, and vibration limits.
FM Approvals, Ltd. Notified Body no.:
Date
Danfoss only vouches for the correctness of the English version of this declaration. In the event of the declaration being translated into any
other language, the translator concerned shall be liable for the correctness of the translation
FM-0432
6
EU DECLARATION OF CONFORMITY
Danfoss Power Solutions
Pressure Controlled Pilot Valve
11101106, 11101115, 11101118, 11101126, and 11101116
Receives a low current input signal from a variety of machine controllers and converts the current
:
signal into a proportional differential pressure signal suitable to control larger hydraulic
equipment
Issued by
Signature
Name
Title
Revision B
11129582 • AN152886481060fr000304 • Décembre 2021
Danfoss A/S
2809
Ex ia IIB T4 IP66
FM12ATEX0031X
Title
Equipment for Potentially Explosive Atmospheres (ATEX)
Title
Explosive Atmospheres – Part 0: Equipment – General requirements
Explosive Atmospheres – Part 11: Equipment protection by safety "i"
Degrees of Protection Provided by Enclosures (IP Code)
2809
Date
Danfoss A/S
DK-6430 Nordborg
Denmark
CVR nr.: 20 16 57 15
Telephone: +45 7488 2222
Fax:
+45 7449 0949
II 1 G
Approved by
Signature
Name
Title
Page 1 of 1
© Danfoss A/S, 2021
Publicité
