Publicité
Les langues disponibles
Les langues disponibles
®
B2.8 AcuTrace
Settings
AcuTrace features can be enabled or disabled (ON / OFF) via the menu of the trophon2 device.
The option to log Operator Cards and / or Chemical Indicator batch information can also be disabled in
this setting.
Disabling removes the scanning of Operator Cards from all instances where scanning the operator card
is needed, including the disinfection workflow. This is reflected in the cycle records stored on the
trophon2 device and the trophon Printer labels.
Disabling logging of chemical indicators removes the need to scan the Chemical Indicator.
1.
Select Menu
2.
Select the preferred status ON / OFF for each setting (AcuTrace Status, Log Operator Cards and
Log Chemical Indicators) and follow the onscreen prompts.
Nanosonics recommend enabling ALL options in this setting menu for full traceability.
Clinical guidlelines endorse tracing the operators of disinfection procedures.
If 'Log Chemical Indicator' is disabled, it is the operator's responsibility to ensure Chemical Indicators
are within their expiry date when used
SECTION B3: trophon AcuTrace PLUS
trophon AcuTrace PLUS allows the trophon2 device to open an API to share data contained within the
device internal storage to other system, such as a Hospital Information Systems or centralised storage
of disinfection data. Upon access, a security certificate is to be obtained from Nanosonics at an
additional and ongoing cost.
To connect to the Hospital Information system, users are required to develop, configure and integrate
an API, a middleware software, which will allow the automatic retrieval of disinfection data from the
trophon2 device to the Hospital Information System server.
All connectivity, configuration and integration with the customer IT system is the responsibility of the
customer, including the development and cost associated with the API middleware.
This package also enables the Parametric Release functionality of the trophon2 device.
For detailed information on trophon AcuTrace PLUS, consult the trophon AcuTrace PLUS Activation
Card IFU.
B3.1 Activation
To activate trophon AcuTrace PLUS, select Menu
onscreen instructions.
Users will be requested to scan the trophon AcuTrace PLUS Activation Card, if purchased from
Nanosonics. Follow the onscreen instructions during the initial setup.
B3.2 Network Parameters Setup
For trophon AcuTrace PLUS API integration, the trophon2 device requires network access.
Note, all of the AcuTrace settings need to be set to ON to allow Parametric Release.
Information on how to configure your network settings is available in B2.6 Basic Settings.
AcuTrace
AcuTrace Settings.
.
L03082 4.0 01/2023
AcuTrace
AcuTrace PLUS and follow the
21
Publicité
