Télécharger Imprimer la page

SOGETRONIC VISION 2 SET Manuel D'utilisation page 24

Masquer les pouces Voir aussi pour VISION 2 SET:

Publicité

Les langues disponibles

Les langues disponibles

11. Adjust the cartridge's position to make sure it is precisely aligned on the headshell so
that the stylus will be tracking the grooves in parallel perfectly.
To achieve this, place the included paper cartridge alignment protractor over the
turntable spindle, carefully lift the tone arm and place the tip of the stylus on the points
marked 130mm and 250mm respectively. Fine tune the cartridge's position on the
headshell until the cartridge is perfectly in parallel with the reference lines at both posits.
12. Tighten the screws completely once the perfect alignment is achieved.
EN - 23 -

Publicité

loading

Produits Connexes pour SOGETRONIC VISION 2 SET