Publicité
Les langues disponibles
Les langues disponibles
Maintenance and Cleaning
Your turntable requires little of no regular maintenance. Remove dust with a slightly damp
antistatic cloth. Never use a dry cloth, this will create static electricity and attract more dust!
Antistatic cleaning agents are available at specialist stores, but must be applied sparingly to
avoid damage to rubber parts. It is recommended to install the needle cover before cleaning or
maintenance is carried out to avoid damage.
If the turntable is not used over a long period of time, the drive belt should be removed to
prevent unequal stretching.
NOTE: Always disconnect the record player from the power supply as a precaution before
maintenance!
Useful Tips
The turntable should be positioned on a low-resonance surface such as wood or multiple layer
ply board to avoid structural vibrations disturbing playback.
Cartridge Replacement
6. Before replacement, put the stylus protector back on the stylus to prevent damage to
the stylus during the replacement process.
7. Carefully remove the wire leads from the original cartridge.
8. Loosen the two screws on the headshell that are securing the cartridge and then
remove the original cartridge.
9. Mount the new cartridge to the headshell and tighten it lightly. Do not completely tighten
the screws at this moment.
10. Connect the wire leads to the new cartridge's terminals. The wire lead color are as
below:
White
Black
Red
Black
Left channel positive
Left channel negative
Right channel positive
Right channel negative
EN - 22 -
(L+)
(L-)
(R+)
(R-)
Publicité
