Handicare Gemino 30 Manuel D'instructions page 21

Labelling
Gemino 30 Gemino 30M
Procedure for reuse
Checklist before reuse
The rollator is intended/fit for reuse.
 Check that the brakes function correctly
 Adjust the brakes if necessary
 Check that the brake levers are in the correct position
 Clean the brake blocks
 Clean the brake springs
 Check that the wheels are in good condition and that they have not been
damaged
 Replace any damaged or worn wheels
 Check that all moving parts are working
 Check and if necessary adjust all screwed connections
 Check the wheel suspension and change if necessary
 Ensure the rollator is clean and hygienic
MB4100
Gemino 30S
Technical specifications
Materials used
The rollator and most of the parts
are manufactured using a special
aluminium alloy.
Areas of application
The rollator is intended for both indoor
and outdoor use on a flat and firm
surface.
It has been developed for individuals
with reduced muscle strength,
reduced movement, reduced mobility
and reduced stability.
Waste handling
Waste relating to packaging, parts
of the rollator or the rollator itself
can be treated as general waste.
The main component of the rollator
is aluminium, which can be melted
down for reuse. The plastic and
cardboard used in the packaging can
be recycled.
CE labelling
The product fulfils the requirements
of the EU-Directive 93/42 EEC for
medical devices. Based on the
classification rules in Attachment IX of
this directive the product is classified
into class I. The declaration of
conformity has been done under the
own responsibility of Handicare based
on the Attachment VII of this directive.
21