Publicité
Les langues disponibles
Les langues disponibles
nlXW`tTznTWZ\W\nTWZ†luU”GGwˆŽŒG]GGm™‹ˆ SGqœ•ŒG[SGYWXWGGYaY]Gwt
Setting the Time
Your microwave oven has an inbuilt clock. When power is supplied,
EN
":0", "88:88" or "12:00" is automatically displayed on the display.
Please set the current time. The time can be displayed in either the 24-
hour or 12-hour notation. You must set the clock:
•
When you first install your microwave oven
•
After a power failure
u
Do not forget to reset the clock when you switch to and from
summer and winter time.
1. To display the time
in the...
24-hour notation
12-hour notation
2. Press the (
) and (
3. Press the
button.
4. Press the (
) and (
5. Press the
button.
What to Do if You are in Doubt or Have a
Problem
If you have any of the problems listed below try the solutions given.
N This is normal.
•
•
•
•
N The oven does not start when you press the
•
Then press the
N The food is not cooked at all
button...
•
•
Once
Twice
•
) buttons to set the hour.
N The food is either overcooked or undercooked
•
•
N Sparking and cracking occur inside the oven (arcing)
•
•
•
N The oven causes interference with radios or televisions
) buttons to set the minute.
•
•
u
6
Condensation inside the oven
Air flow around the door and outer casing
Light reflection around the door and outer casing
Steam escaping from around the door or vents
button.
Is the door completely closed?
Have you set the timer correctly and/or pressed the
Is the door closed?
Have you overloaded the electric circuit and caused a fuse to blow or a
breaker to be triggered?
Was the appropriate cooking length set for the type of food?
Was an appropriate power level chosen?
Have you used a dish with metal trimmings?
Have you left a fork or other metal utensil inside the oven?
Is aluminium foil too close to the inside walls?
Slight interference may be observed on televisions or radios when the oven is
operating. This is normal.To solve this problem, install the oven away from
televisions, radios and aerials.
If interference is detected by the oven's microprocessor, the display may be
reset.To solve this problem, disconnect the power plug and reconnect it.
Reset the time.
If the above guidelines do not enable you to solve the problem,
contact your local dealer or SAMSUNG after-sales service..
button?
Publicité
