Télécharger Imprimer la page

Makita DCL284F Manuel D'instructions page 8

Publicité

Les langues disponibles

Les langues disponibles

Prefilter or high performance filter
and HEPA filter
1
2
Fig.7
► 1 . Capsule 2. Prefilter 3. High performance filter
4. HEPA filter
NOTICE:
Do not underlay the high performance
filter with an optional filter (non-woven cloth). The
filters could not be removed from the cleaner.
NOTE: Do not install an optional filter (non-woven
cloth) between the HEPA filter and prefilter. The suc-
tion power may be reduced.
NOTE: Always use the high performance filter that is
framed with an originally-designed stay when overlay-
ing it on the HEPA filter.
1
Fig.8
► 1 . High performance filter 2. Stay (designed for high
performance filter)
Disposing of dust
CAUTION:
Empty the cleaner before it
becomes too full, or the suction force weakens.
CAUTION:
Be sure to empty the inside of the
cleaner itself of dust. Failure to do so may cause the
filter to be clogged or the motor to be damaged.
4
3
2
In order to drop dust sticking on the filter in the capsule,
tap the capsule 4 or 5 times with your hand.
Fig.9
► 1 . Capsule
Point suction inlet downwards, turn capsule in direction
of arrow in diagram, and disconnect capsule slowly and
straight.
1
Fig.10
► 1 . Capsule 2. Suction inlet
NOTE: Dust may spill out when capsule is opened, so
be sure to set a garbage bag beneath capsule.
Remove accumulated dust from the inside of capsule
and high performance filter.
1
Fig.11
► 1 . Capsule 2. High performance filter
8 ENGLISH
1
2
2

Publicité

loading