Hiyasu ASE 9U2i Manuel D'instructions page 86

06Manual 10Hiyasu Eng 19/4/06
Auto Operation
(1) Unit start
Link with electronic power.
Press ON/OFF on the remote controller, unit starts.
The liquid crystal will display the working state of last time (Except Timer, Sleep,
Power/Soft and Healthairflow).
2) Select operation mode
Press MODE button. For each press, operation mode
changes as follows:
Then
Select Auto operation
(3) Select temp.setting
Press TEMP. button.
Every time the button is pressed, temp.setting increase 1º C,if kept depressed,
it will increase rapidly
Every time the button is pressed, temp.setting increase 1º C,if kept depressed,
it will decrease rapidly
Select a desired temperature.
(4) Fan speed selection
Press FAN button. For each press, fan speed changes as
follows:
Air conditioner is running under displayed fan speed
When FAN is set to AUTO, the air conditioner automatically adjusts the fan speed
according to room temperature.
(5) Unit stop
Press ON/OFF button, the unit stops.
About Auto Operation
Under the mode of auto operation, air conditioner will automatically select Cool or
Heat operation according to room temperature.
84
All manuals and user guides at all-guides.com
13:11 Página 84
OPERATION
Remote controller