Publicité
Les langues disponibles
Les langues disponibles
en-us Operation
Symbol Cooking zone
Triple cooking zone
6 Operation
Operation
Here you will find everything you need to know about op-
Operation
erating your appliance.
6.1 Turning the cooktop on
Press ON I OFF.
▶
The indicator above ON I OFF turns on.
a
lights up in the cooking zone displays.
a
6.2 Turning the cooktop off
Press ON I OFF.
▶
The indicator above ON I OFF turns off.
a
The
displays turn off.
a
All cooking zones are turned off.
a
The residual heat indicators remain lit until the cooking
a
zones have cooled off sufficiently.
Note: The cooktop turns off automatically when all the
cooking zones have been turned off for more than 20 sec-
onds.
6.3 Cooking zone settings
In order to make settings on a cooking zone, the cooking
zone has to be selected.
Set the desired power level for each cooking zone in the
settings area.
Setting
Power level
lowest power level
highest power level
Intermediate setting for all power levels
The intermediate setting is displayed as a dot
in the cooking zone display, for example .
lights up when you set the intermediate level
between power level
Note: The cooktop may temporarily reduce the power au-
tomatically to protect the fragile parts of your appliance
and to prevent the appliance from producing excess noise.
Setting the power level
Requirement: The cooktop is turned on.
Place the cookware on the cooking zone.
1.
Press on the printed words for the cooking zone you
2.
want to select
.
lights up in the cooking zone display.
a
lights up under the cooking zone display.
a
12
Function
This cooking zone can have three different sizes. When you place
cookware on the cooking zone, the part of the cooking zone that is
fully covered by the cookware is turned on automatically. The size
can be single, dual or triple.
and .
Set the power level in the settings area
3.
set an intermediate level, for example 1.5 or 3.5.
1
Notes
If there is no cookware on the cooking zone, the cook-
¡
ing zone display blinks. This means that the cooking
zone tries to detect the cookware. Place cookware on
the cooking zone within 30 seconds, or the cooking
zone will switch itself off.
If the indicators blink while cookware is present on the
¡
cooking zone, check whether the cookware is suitable
for induction cooking.
→ "Testing cookware suitability", Page 19
If there is cookware on the cooking zone before switch-
¡
ing the cooktop on, it is detected within 20 seconds after
touching the main switch and the cooking zone is se-
lected automatically. Set the power level within 10 sec-
onds. Otherwise, the cooking zone switches off after
20 seconds.
If there are several pieces of cookware on the cooktop
¡
when it is switched on, only one piece of cookware is
detected.
Changing the power level
Press on the printed words for the cooking zone you
1.
want to select.
Set the power level in the settings area.
2.
Turning the cooking zone off
Press on the printed words for the cooking zone you
1.
want to select.
Select
in the settings area.
2.
The residual heat indicator lights up after approximately
a
10 seconds.
Note: You can also switch off the cooking zone directly by
touching the cooking zone symbol for longer than 3 sec-
onds.
. Press
to
2
Publicité
