Publicité
Les langues disponibles
Les langues disponibles
Overview
Video Keypad Setup
Charge the Battery
Download the myQ App
Get Connected
Install Mounting Bracket
Secure to Mounting Bracket
Using Your Video Keypad
Video Storage Plan
Additional Resources
Troubleshooting
Video Keypad Setup
Install Mounting Bracket
Position the mounting bracket so that the Video Keypad is at your preferred
orientation. If using the 20° mount, the bracket can be flipped to adjust the angle
depending on your surroundings. We recommend positioning the keypad to be
angled toward your driveway.
Using the two Mounting Screws and a Phillips screwdriver, secure the bracket by
driving the screws into the wall (or anchors, if installed) through the mounting holes
until flush with the bracket.
Secure to Mounting Bracket
If using the 20° or 0° mounting bracket, slide the top of the Video Keypad into
the ridges at the top of the bracket, then push the bottom of the keypad into the
bracket.
If using the swivel mount, push the Video Keypad directly into the mount to snap it
into place with the ridges on the sides of the bracket.
When removing the Video Keypad from any of the mounting brackets, firmly grasp
the device from the bottom, then pull out and up.
6
Publicité
