Publicité
Les langues disponibles
Les langues disponibles
Overview
Video Keypad Setup
Charge the Battery
Download the myQ App
Get Connected
Install Mounting Bracket
Secure to Mounting Bracket
Using Your Video Keypad
Video Storage Plan
Additional Resources
Troubleshooting
Video Keypad Setup
Install Mounting Bracket
Select a location to mount your Video Keypad at a minimum height of 5 feet (1.5 m)
out of reach of small children. When selecting a mounting location, consider the
visual you want the camera to capture and the convenience of its placement:
•
Are there any other entry points to my home I want to view?
•
Is there a direction down the street I would prefer to see?
•
Which side of my home is more likely to have activity I'd like to view?
•
Is the keypad installed in a location that is convenient to access?
Begin by using the included mounting bracket as a template to mark the position of
the bracket's mounting holes with a pen or pencil. Please note, the location of the
holes may differ from your existing keypad (if applicable).
If installing your Video Keypad on stucco, brick, or concrete:
Drill holes in your wall with a 1/4" masonry bit, then insert the included wall anchors
by pushing them into place or lightly tapping with a hammer. If installing on wood or
vinyl siding the wall anchors are not needed, and you can skip this step.
5
Publicité
