Publicité
Les langues disponibles
Les langues disponibles
The connected audio player cannot be
controlled.
"Voice" calling method is not successful. Use "Voice" calling method in a more quiet environment. / Reduce
"Please Connect BT Adapter" appears on
the display.
"Connection Error" appears on the
display.
"Error" appears on the display.
"Please Wait..." appears on the display.
"HW Error" appears on the display.
The iPod does not turn on or does not
work.
The sound is distorted.
Noise is generated.
Playback stops.
"No File" appears on the display.
"Cannot Play" appears on the display.
Pandora cannot be operated with this
unit.
32
ENGLISH
Symptom
Cannot Skip
No Station
No Active Station
Set Up Pandora On Your
Device
Remedy/Cause
Check whether the connected audio player supports AVRCP
(Audio/Video Remote Control Profile). (Operations depend on the
connected audio player.) / Disconnect and connect the Bluetooth
player again.
the distance from the microphone when you speak the name. /
Change the "NR/EC Mode" to "Off" (page 14), then try again.
Connect the USB Bluetooth Adapter to the unit before you can
perform any operation.
The device is registered but the connection has failed. Use
<Connect Phone/ Connect Audio> to connect the device again.
Try the operation again. If "Error" appears again, check if the
device supports the function you have tried.
The unit is preparing to use the Bluetooth function. If the message
does not disappear, turn off and turn on the unit, then connect the
device again (or reset the unit). (page 3).
Reset the unit and try the operation again. If "HW Error" appears
again, consult your nearest JVC car audio dealer.
Check the connecting cable and its connection. / Charge the
battery of the iPod/iPhone. / Reset the iPod/iPhone. / Check
whether <iPod Switch> setting is appropriate. (page 29)
Deactivate the equalizer on the iPod/iPhone.
Turn off (uncheck) the "VoiceOver" feature of the iPod. For details,
visit <http://www.apple.com>.
The headphones are disconnected during playback. Restart the
playback operation. (page 18)
Check whether the device contains playable files.
Check whether the connected iPod/iPhone is compatible with this
unit. (page 19)
Make sure <Application Mode> is selected for <iPod Switch>.
(page 29) / Check the cords and connections.
Pandora's skip limit has been reached.
No registered station in your iPod/iPhone.
No active station.
Pandora's setup is not completed. Connect the iPod/iPhone to this
unit after completing the setup in your iPod/iPhone.
Publicité
