Publicité
Les langues disponibles
Les langues disponibles
If "Settings" is selected in step 2 ...
Turn the control dial to select an item (see
the following), then press the control dial
to confirm.
The following settings are applicable to
the paired device. If another device is
paired, make the settings again.
• Phonebook Select*
In Phone [Initial] : The unit browses the
phonebook of the connected phone.
In Unit : The unit browses the phonebook
registered in the unit. (To copy the phonebook
memory, see <Phonebook Trans> on page 17.)
• If the phonebook contains many numbers, you
can fast search (±10, ±100, ±1 000) through
the phonebook by turning the control dial
quickly.
• To search through the phonebook, see the right
column.
*
Selectable only when the connected phone
supports PBAP.
Auto Answer
•
On : The unit answers the incoming calls
automatically. / Off [Initial] : The unit does not
answer the calls automatically. Press
the control dial to answer.
Ringing Tone
•
In Unit [Initial] : The unit rings to alert you
when a call/Text Message comes in.
Call : Select your preferred ring tone when a
–
call comes in [ Tone 1 — 5 ].
Message : Select your preferred ring
–
tone when a text message comes in
[ Tone 1 — 5 ].
• Default ring tone is different according to the
paired device.
In Phone : The unit rings using the connected
phones' ring tone to alert you when a call/Text
Message comes in. (The connected mobile phone
rings if it does not support this feature.)
14
ENGLISH
Ring Color
•
29 preset colors [ Initial: Color 06 ] : When a
call/text message comes in, the display will flash
in the selected color. (The display will change to
the original color when the call is answered or the
incoming call stops.) / Off : Cancels.
NR/EC Mode
•
On [Initial] : The unit adjusts the Noise Reduction
and Echo Cancellation of the microphone
connected to the unit for clearer sound. /
Off : Cancels.
• MIC Setting
Adjust the sensitivity [ Level 01/ 02/ 03 ]
of the microphone connected to the unit.
[ Initial: Level 02 ]
• Message Notice
On [Initial] : The unit informs you of the arrival
of a message by ringing and displaying "[Device
name] Received Message" / Off : The unit does
not inform you of the arrival of a message.
To select a contact from the phonebook
1 Select "Phonebook" calling method.
(page 13)
or
2 Press 5/∞ to show the search menu
(A to Z, 0 to 9, and OTHERS).
"OTHERS" appears if the 1st character is not
A to Z, or 0 to 9, such as #, —, !, and etc.
3 Press 5/∞ to select your desired
character, then press the control dial to
confirm.
The name list of the selected character
appears.
4 Turn the control dial to select your
desired contact, then press to confirm.
• Only the existing characters will be shown on
the search menu.
• Press and hold 5/∞ to continuously change
the character of the search menu.
• If your phonebook contains many contacts,
searching may take some time.
Publicité
