Publicité
Les langues disponibles
Les langues disponibles
TOP BOWL CLEANING PROCEDURE
With the key, which is packed with the cream separator, unscrew the top bowl fixing nut
as it is shown on the picture below.
The easiest way to perform this procedure is:
1.
Fix key into the holes, which are on the top bowl fixing nut.
IF IT IS NOT POSSIBLE TO MOUNT OFF THE TOP BOWL FROM THE MOTOR AFTER
SKIMMING, PLEASE SHAKE IT GENTLY.
PLEASE AVOID TO USE FORCE – IT CAN CAUSE HARM TO THE DEVICE AND MOST
OF THE PARTS.
18
2.
Press the key down and turn it until the fixing nut is released. It is
now possible to unscrew the fixing nut by hand.
3.
Dismount the top bowl cover with the help of the key and separate
all different pieces, which are found under the cover - plastic partition,
metal discs and rubber washer. Clean them with hot water. To achieve
better results, cleaning detergent can be added to the hot water.
4.
Wash all the parts with hot water and dry them with dry and
soft duster.
5.
Never wash the discs in the dishwasher!
Publicité
