Janschitz Milky AR 85 Notice D'utilisation page 15

HOW TO ASSAMBLE THE CREAM SEPARATOR
1.
Put the housing on a desk or other plain and stable surface.
2.
Put assembled top bowl on the conical motor beam and softly press it.
3. Put skimmed milk outlet on the top and then also cream outlet on the top of
the housing
4.
Turn top bowl with hand and check if nothing is touching the outlets. Adjust the outlets to
the desired position for skimming.
5. Put the container holder on the cream funnel (outlet). The floater is placed in the con-
tainer holder. The container is placed on the container holder (please see picture below)
Fixing hooks are only available in FJ 130
6.
Place closing cork in the hole situated in the middle of milk container. The narrow side of
the closing cork handle must be turned away from the cut in the container (see picture). The
milk outflow will be closed.
WHEN FILLING THE CONTAINER WITH MILK, THE CLOSING CORK MUST BE
CLOSED! THE THIN PART OF THE CLOSING CORK MUST POINT TO THE NOTCH IN
THE CONTAINER.
Rubber fixing hook are only available on FJ 130.
15