The potential mildew risk is indicated by the color display [7] green – yellow
– red and via rising acoustical signal tones:
Scale [G]
0...60%
60...80%
80...100%
What to do about mildew?
If you detect a high risk of mildew infestation, the initial remedy is to
change climatic conditions:
Increase the air and/or wall temperature.
Reduce humidity.
Appropriate measures for this can include:
Reducing / avoiding water induction.
Providing improved ventilation or air exchange.
Preventing microclimate zones by avoiding narrow gaps such as the space
between furniture and a wall.
Checking insulation.
Using dehumidifiers.
If mildew has already formed:
!
Do not risk your health!
!
Wear protective equipment, at least gloves and breathing protection!
!
Avoid lingering in infested areas!
Use recommended products for treating mildew, and in cases of intensive
infestation, engage an expert for removal.
Bag
Use the bag, included or available as an option, to protect the ClimateDe-
tector when not in use.
Troubleshooting
No display [7, 8].
Battery is discharged Replace battery.
Battery pictogram [E] is displayed.
Battery is low Replace battery.
Display [B] shows "ErOL" (Error Low).
The measured temperature is too low (< -50°C / -58°F).
Repeat the measurement at another location.
26
Color display [7]
Green
Yellow-Green
Red
Signal tone
NONE
Interval
– – –
Continuous ––––––
KlimaDetector ENGLISH
Mildew risk
Low
Possible
High
© KALEAS GmbH & Co. KG