Publicité
Les langues disponibles
Les langues disponibles
5. NEVER POINT TOOL AT YOURSELF OR OTHERS
IN WORK AREA.
Always assume the Nailer
contains fasteners.
Never point the Nailer at yourself
toward yourself or others,
whether it contains fasteners or
not.
If fasteners are mistakenly driven,
it can lead to severe injuries.
Never engage in horseplay with
the Nailer.
Respect the Nailer as a working
implement.
6. KEEP FINGERS AWAY FROM TRIGGER WHEN
NOT DRIVING FASTENERS TO AVOID
ACCIDENTAL FIRING.
Never carry the Nailer with finger on trigger since you
could drive a fastener unintentionally and injure
yourself or someone else.
Always carry the Nailer by the handle only.
7. ALWAYS WEAR EAR AND HEAD PROTECTION.
Always wear ear protection to protect your ears from
loud noise.
Always wear head protection to protect your head
from flying objects.
8. USE OUTSIDE OR WELL–VENTILATED AREAS.
This Nailer exhausts carbon
monoxide which are a danger to
health when inhaled.
This Nailer shall not be used in
enclosed or poorly ventilated
areas.
Do not inhale.
9. OPERATE WITHIN PROPER TEMPERATURE
RANGE.
The operating environment for this device is between
32°F (0°C) and 104°F (40°C) so ensure use within this
temperature range.
The device may fail to operate below 32°F (0°C) or
above 104°F (40°C).
10. STORE NAILER PROPERLY WITH FUEL CELL AND
BATTERY REMOVED.
When not in use, the Nailer, fuel
cell and battery should be store
120°F MAX
in tool case and in a dry place.
(50°C)
Store indoors at temperature
below 120°F (50°C).
SAFETY
— Continued
WARNING
11. KEEP WORK AREA CLEAN.
12. KEEP VISITORS AWAY.
13. DRESS PROPERLY.
14. CHECK PUSH LEVER BEFORE USE.
15. KEEP ALL SCREWS AND COVERS TIGHTLY IN
16. DO NOT LOAD FASTENERS WITH TRIGGER OR
17. KEEP FACE, HANDS AND FEET AWAY FROM
— 5 —
Keep the Nailer, fuel cell and
battery out of direct sunlight and
out of in a vehicle.
Keep out of reach of children.
Look the atorage area.
Cluttered areas invite injuries. Clear all work areas of
unnecessary tools, debris, furniture, etc.
Do not let visitors handle the Nailer.
All visitors should be kept safely away from work area.
Do not wear loose clothing or jewelry as they can be
caught in moving parts.
Rubber gloves and nonskid footwear are
recommended when working outdoors.
Wear protective hair covering to contain long hair.
The Push Lever and Chamber operate in conjunction
for this device.
Remove fuel cell and battery, and then make sure the
push lever operates properly. (The push lever may be
called "Safety".) Never use the Nailer unless the push
lever is operating properly, otherwise the Nailer could
drive a fastener unexpectedly. Do not tamper with or
remove the push lever, otherwise the push lever
becomes inoperable.
Pull the Feeder knob with the device facing upward
and press down the Push lever then confirm that the
Push lever securely returns to its original position.
The Push lever operation becomes especially heavy in
low temperatures and drive operations may not
function.
PLACE.
Keep all screws and covers tightly mounted. Check
their condition periodically.
Never use the Nailer if parts are missing or damaged.
PUSH LEVER DEPRESSED.
When loading fasteners into the Nailer,
1) do not depress the trigger;
2) do not depress the push lever; and
3) keep the Nailer pointed downward.
FIRING HEAD DURING USE.
Never place your face, hands or feet closer than 8
inches (200 mm) from the firing head.
A serious injury can result if the fasteners are deflected
by the workpiece, or are driven away from the point of
entry.
English
Publicité
