JVC KD-R810 Manuel D'instructions page 20

Setting item
Auto Connect
Auto Answer
Message
Notice
MIC Setting
NR/EC Mode
Ringing Tone
Phonebook
Trans
Phonebook
1
Select *
Initialize
Information
1
* Selectable only when the connected phone supports PBAP.
2
* Displayed only when a Bluetooth phone/audio player is connected.
20 ENGLISH
Selectable setting, [
• Last : The connection is established automatically with the last
connected Bluetooth device when you turn on the unit.
• Off : The unit does not connect the Bluetooth device automatically.
Connect the device manually. (
• On : The unit answers the incoming calls automatically.
• Off : The unit does not answer the calls automatically. Answer the
calls manually. (
• On : The unit informs you of the arrival of a message by ringing and
displaying "Received Message."
• Off : The unit does not inform you of the arrival of a message.
— : Adjust the volume of the microphone connected to the unit.
[ Level 01/02/03 ]
• On : The unit adjusts the Noise Reduction and Echo Cancelation of
the microphone connected to the unit for clearer sound.
• Off
: Cancels.
• In Unit : The unit rings to alert you when a call/Text Message comes in.
Call:
Message: Select your preferred ring tone when a Text
• In Phone : The unit rings (using the connected phones' ring tone) to
alert you when a call/Text Message comes in. (The connected
mobile phone rings if it does not support this feature.)
— : You can copy the phonebook memory of a mobile phone into
the unit (via OPP).
Enter the PIN code to the unit to transfer the phonebook into
the unit. You can transfer a maximum of 400 numbers.
• In Phone : The unit browses the phonebook of the connected phone.
• In Unit : The unit browses the phonebook registered in the unit.
• Yes : Initialize all the Bluetooth settings (including stored pairing,
phonebook, and etc.).
• No : Cancels.
• My BT Name
• My Address
• BT Software Ver
2
• Connected Phone *
2
• Connected Audio *
Initial: Underlined
17)
Select your preferred ring tone when a call comes
in. [ Tone 1/2/3 ]
Message comes in. [ Tone 1/2/3 ]
: Shows the unit name.
: Shows address of USB Bluetooth Adapter.
: Shows the software version.
: Shows connected phone name.
: Shows connected audio device name.
]
15)