Publicité
Les langues disponibles
Les langues disponibles
display. Use DOWN and UP button to select the 0
selected, press the ENTER button to setup, to go back to the functions without any change
press the MENU button again. Hold and press the MENU button about one second or wait
for one minute to exit the menu mode.
Gobo2 Focus
Select Gobo2 Focus, press ENTER button to confirm, present mode will blink on the
display. Use DOWN and UP button to select the 0
selected, press the ENTER button to setup, to go back to the functions without any change
press the MENU button again. Hold and press the MENU button about one second or wait
for one minute to exit the menu mode.
Function Delay
Select Function Delay, press ENTER button to confirm, present mode will blink on the
display. Use DOWN and UP button to select the No Delay or 1S/2S/3S Delay (Wait for 1/2/3
seconds before these Functions of 15/16 CH are activated/deactivated) mode. Once the
mode has been selected, press the ENTER button to setup, to go back to the functions
without any change press the MENU button again. Hold and press the MENU button about
one second or wait for one minute to exit the menu mode.
Dimmer Calibrate
Press the MENU button to show Dimmer Calibrate on the display. Press the ENTER button
and the display will blink. Use the DOWN and UP button to calibrate the dimmer for a
maximum output from 50 (limited to 50% of the really max. output) to 100 (maximum output
is not limited). Once the mode has been selected, press the ENTER button to setup, to go
back to the functions without any change press the MENU button again. Hold and press the
MENU button about one second or wait for one minute to exit the menu mode.
Auto-Test
Press the MENU button up to when the Auto-Test is blinking on the display. Pressing
ENTER button and the unit will run self-test by built-in program. To go back to the functions
press the MENU button again. Hold and press the MENU button about one second or wait
for one minute to exit the menu mode.
Temperature
Press the MENU button up to when the Temperature Test is blinking on the display.
Pressing ENTER button and the display will show the temperature of the unit. To go back to
the functions press the MENU button again. Hold and press the MENU button about one
second or wait for one minute to exit the menu mode.
...
255 mode. Once the mode has been
...
255 mode. Once the mode has been
30B
Publicité
