HOMCOM 820-252V70 Mode D'emploi page 6

SET WEEKLY PROGRAM (ONLY by remote control)
- The current time must be set before any programming.
- Press to switch on the appliance.
1- Press P to enter into weekly program setting (the light P is on).
2- Press DAY to set the day of program activation (d1, d2,d7...).
3- Press EDIT to set the time period number (P1, P2,...P6).
4- Press TIME/ON to set the turn-on time (00, 01, 02...,24,) Cannot set to minutes.
5- Press TIME/OFF to set the turn-off time (00, 01, 02,..., 24).
Cannot set to minutes. TIME/OFF can not be less than TIME/ON.
6- Press + or - to set the setting temperature of this time period.
7- Press OK to confirm the setting.
8- Repeat steps 3 to 7 to set another time period number for the same day.
Up to 6 programs are available for each day of the week.
9- Repeat steps 2 to 8 to set the others days of the week.
- Press P to active the weekly program (the light P is on), or to disable it (the light P is
off).
- After the above setting are completed and P program is work, press DAY / EDIT
TIME/ON and TIME/OFF to check the setting time of each day and time period.
- When the turn-on time is same as the turn-off time, the appliance is in stand by mode.
If the setting temperature is not set, the default setting temperature is 23°C. If room
temperature higher 23°C, the appliance is not switch on.
- The weekly program is erased when the switch is off.
For example: Setting Monday 1st period working time 7:00 to 13:00
SET OPEN WINDOW (ONLY by remote control)
- Press to switch on the appliance, heating for a
moment
until stability.
- Press to active the open window mode (the light
is on).
- Press + or - to set the setting temperature for the
open windows function.
- Press to disable the open window mode (the light
The appliance will resume to previous working mode.
During open window mode, if the room temperature drops from about 5°C to 10°C in
less than 10 minutes, the appliance will stop working and enter into stand by mode.
Press again to switch on the appliance.
.If open-window mode and weekly timer program simultaneously, if the appliance turn
off in weekly time, the appliance is not turned on. If it already turn on in weekly timer,
the appliance working as the setting temperature under open-window mode.
is off).
5
EN