HOMCOM 820-252V70 Mode D'emploi page 5

TURN-ON, TURN-OFF (by control panel and remote control)
Turn-on in stand-by mode:
- Press to set the appointment turn-on time in 1-12 hours (the light
- The display automatically decreases 1 hour for each hour passed. When the
appointment power-on time arrived, the product will automatically turns on. The
default setting temperature is 23°C.
- If not setting the setting temperature and weekly program, the unit will automatically
turn-off after continuous-by.
For example to set appointment turn-on time to 8 hours.
Turn-offinrunning mode
Press to set the appointment turn-on time in 1-12 hours (the light
the appointment power-off time arrived, the product will automatically turns off.
The default setting temperature is 23°C
For example to set appointment turn-off time to 8 hours.
SET CURRENT TIME (ONLY by remote control)
- Press to switch on the appliance.
- Press SET to display the hour.
- Press + or - to set the current hour (00 to 23).
- Press SET again to display the minute.
- Press + or - to set the current minute (00 to 59).
- Press SET again to display the day of week.
- Press + or - to set the current day (d1= Monday,d2=Tuesday,d3=Wednesday,
d4 = Thursday, d5 = Friday, d - Press OK to confirm the setting).
For example, Wednesday 9:30 , Setting temperature = 25°C :
Setting temperature Day
To check the current time and setting temperature, press SET again.
If main switch off or power cut off , it need reset the time.
4
EN
is on).
is on)When