Publicité
Les langues disponibles
Les langues disponibles
NOTE: As the door gets pressed in during shipping, after reversing the door, the
gasket may have to be reset. This is done to prevent the cool refrigerated
air from escaping. If there is a gap between the door gasket and the
cabinet, set the gasket by gently pulling it out to seal the gap.
Door Alignment
1. Remove the top hinge cover.
2. Loosen the top hinge screws using a phillips head screwdriver.
3. Adjust the door or put a spacer in between and then tighten the screws.
4. Replace the top hinge cover.
REfRIGERATOR fEATURES AND USE
General features
Adjustable temperature dial:
Your refrigerator will automatically maintain the temperature level you select.
The temperature control dial has 7 settings plus "0". 1 is the warmest. 7 is the
coldest. At first, set the dial to 4 and allow 24 hours to pass before adjusting the
temperature to your needs.
Note: If the refrigerator has been placed in a horizontal or tilted position for any
period of time wait 24 hours before plugging the unit in.
Refrigerator Interior Shelves
To remove or replace a full-width slide-out shelf: (see fig. # 1)
1. Gently tilt the shelf up and slide forward until the shelf has been
completely removed.
2. To replace the shelf, gently slide the shelf back.
fig. # 1
English
8
Publicité
