Publicité
Les langues disponibles
Les langues disponibles
Chimney Flues Must Be Removed Before Installing the Hood
2
Loosen the two screws fastening the lower chimney
and remove this from the lower frame.
4
3
Loosen the two screws fastening the upper chimney
and remove this from the upper frame.
If you need to adjust the height of the frame,
proceed as follows:
• Unfasten the metric screws joining the two
columns, located at the sides of the frame
(1,2,3,4,5,6).
• Adjust the frame to the height required, then
refit all the screws removed as above.
5
6
4
3
2
1
9
Publicité
