Saddle Adjustment - Mondraker Thundra R Manuel D'utilisation

2.1.2 Saddle adjustment

Correct saddle adjustment is an important factor in getting the best performance and comfort from
your bicycle. You can adjust the saddle in two directions. First you have to get the correct height. To do
that you have to pull the seatpost upwards until you reach a position where you are seated on your
bike with your heel on the pedal with the crank in its lowest position and parallel to the seatpost with
your leg almost completely straight. Remember that you should not pull the seatpost out beyond the
indicated limits. If you still cannot get a comfortable riding position, please contact your Mondraker
dealer for help.
WARNING: If the seatpost is not inserted far enough into the seat tube it might bend and even
break. This could cause you to lose control and fall.
You should also adjust the saddle angle. You can move the saddle nose up and down by using the bolt
under the saddle. The most common position is to have the saddle horizontal to the ground.
You can also adjust the saddle forward and backward by sliding it along the rails. Move it until you find
the most comfortable position. Remember that moving the saddle forward and backward will mean
you are closer to or further away from the handlebar.
The bolts on latest generation seatposts might be in a different place or arranged differently, but you
can still adjust your saddle in both of the ways described above.
32