Interrupting Charging; Finishing Charging/Disconnecting The Battery - akkuteam VAS 5903 Instructions De Service

Charging 3.
(continued)
1.
Interrupting
charging
2.
3.
Finishing char-
ging/disconnec-
ting the battery
1.
2.
3.
4.
When the battery is fully charged, the charger begins conservation charging.
NOTE! during charging, increased demand for current can lead to a drop in
battery voltage (e.g. switching on additional consumer loads). To compensate,
the charger can briefly increase the current to the maximum charging current
(see Technical Data, user-defined settings in USER menu).
Press Start/Stop button to interrupt charging
Press the Info button to display the parameters in the following sequence:
- actual charging current
- actual battery voltage
- amount of charge (Ah) fed in so far
- energy (Wh) fed in so far
- length of time charging so far
Press Start/Stop button again to resume charging
Self test
CAUTION! Risk of sparks when disconnecting the charging terminals. Before
disconnecting the charging terminals, stop charging by pressing the Start/Stop
button.
Finish charging
Disconnect (-) charging terminal from battery
Disconnect (+) charging terminal from battery
- all bars are permanently displayed
- The battery is 100 % charged
- Battery is always ready to use
- Battery can remain connected to charger for as long
as required
- Conservation charging counteracts battery self-
discharge
E.g.: charging continues
11