CABASSE RIALTO Notice Utilisateur page 37

ENGLISH
PLAYBACK WITH TV INPUT
The RIALTOs are compatible with the HDMI eARC (enhanced Audio Return Channel) output of your TV
for integrated control via an HDMI version 2.1 cable. The speakers must always be connected to your
local network first before the HDMI connection. The speakers also support ARC and HDMI CEC. HDMI
CEC allows you to use the TV remote control to adjust the volume of the speakers.
CONNECTING THE HDMI CABLE
Connect the HDMI output port on your TV to the TV port on the back panel of the primary speaker
using an HDMI cable.
In your TV settings, enable eARC, ARC or CEC in the HDMI settings. Refer to your TV's user manual for
details, as HDMI connections may have different names by manufacturer (e.g. Anynet+ for Samsung,
Simplink for LG). Also make sure that the TV's digital audio output setting is PCM or stereo (not Dolby,
Bitstream, Auto etc.).
PLAYBACK WITH OPTICAL INPUT
You can connect your devices with optical output (e.g. TVs and game consoles) to the speakers using
an optical cable. The speakers must always be connected to your local network first before the optical
connection.
CONNECTING THE OPTICAL CABLE
Connect the optical output of your device and the optical input on the rear panel of the primary
speaker via an optical cable. Make sure your TV is set to PCM or stereo digital audio output. Refer to
your TV's user manual for details.
PORT LINK
The link port allows for a reduced latency between your two speakers, if you notice a latency between
the picture and the sound, it is possible to go into the settings of your TV, if that is not enough you can
connect your two speakers via the link port.
37