CABASSE RIALTO Notice Utilisateur page 31

BLUETOOTH CONNECTION
1. Once the speaker is on, press the "Pairing" button on
the back
2. The "Pairing" LED on the back should flash
3. Activate Bluetooth on your mobile
4. Select "RIALTO" from the list of available devices
5. Once the connection is successful, the LED "Pairing" on
the back stops flashing
WIRE CONNECTION (LAN) TO THE ETHERNET NETWORK
The wired Ethernet connection guarantees an optimum and
constant transfer rate in any environment. Use this if Wi-Fi
mode operation shows untimely cuts or stops of music, signs
of a saturated Wi-Fi network, or too much router-to-stream
distance.
Connect an RJ45 cable between the speaker and your router
(or Box Internet).
The connection is established when the STATUS diode
changes to solid blue. The WIFI connection is then
automatically disabled.
CAUTION: DHCP mode of the router must be enabled.
ENGLISH
Pairing
Ethernet
31