Operation Method
1
Cable rewinder
button
2
On/Off switch
Power regulator
3
Auxiliary air slide
4
Dust bag change indicator
(1) Pull out the cord as long as you need, but
do not exceed the mark of red and yellow.
(2) To retract the cable, unplug the power cord
from the socket. Press the button for automatic
cord rewinding.
(1) Press the switch button to turn on/off the
cleaner.
(2) Use power regulator to adjust the power
steplessly. Please set the power regulater
at "MIN" position before turning on the unit.
You can regulate the suction power
mechanically if necessary by adjusting the
auxiliary air slide on the handle.
If the red mark of the dust bag change indicator
moves into the middle of the small window,
please check if (A) the dust bag has heen full
or (B), a blockade has been occured in the
hose or the nozzle:
(A) Replace or clean the dust bag or
(B) remove the blockade.
13