Publicité
Les langues disponibles
Les langues disponibles
Chapter 4 : TECHNICAL SPECIFICATIONS
MECHANISM
01 Channel
02 Pulse Amplitude Adjustable 0-80mA, Max output 80mA peak to peak
03 Output Voltage
04 Wave Form
05 Power supply
06 Size
07 Weight
08 Pulse Rate
09 Pulse Width
10 Burst Mode
(B Mode)
11 Modulation
12 Operating
Condition
13 Remark
TECHICAL DESCRIPTION
Dual, isolated between channels
(15.8mA rms) into 500ohm load each channel.
Adjustable 0-40V, Max output 40V peak to peak
(7.9V rms) into 500ohm load each channel.
Asymmetrical Bi-Phasic Square Pulse
One 9 Volt Battery, type 6F22
95(H) x 65(W) x 23.5(T) mm
115 grams (battery included)
Adjustable, from 2 Hz to 150 Hz
Adjustable, from 30µs to 260µs
Bursts occur twice per second. The pulse width is
Pulse rate is automatically varied in a cyclic pattern
over a nominal 10 second interval (in max 150Hz).
Pulse rate decreases linearly, over a period of 4 seconds,
from the control setting value to a value which is 40%
less. The lower pulse rate will continue for 1 second and
then the pulse rate increases linearly over a period of 4
seconds to the original value. This will continue for 1
second and the cycle is then repeated
Temperature : 0°~40°C
Relative Humidity : 30%~75%
Atmosphere Pressure : 700Hpa~1060Hpa
There may be up to a +/- 5% tolerance of pulse width
and pulse rate and +/- 20% tolerance of amplitude
& voltage.
4
Publicité
