Med-Fit 1 Manuel D'instructions page 19

Chapter 13 : MAINTENANCE, TRANSPORTATION
AND STORAGE OF TENS DEVICE
1.
Note: Do not smoke or work with open lights (for example, candles,
2. Stains and spots can be removed with a cleaning agent.
3. Do not submerge the device in liquids or expose it to large amounts
of water.
4. Return the device to the carrying box with sponge foam to ensure
that the unit is well-protected before transportation.
5. If the device is not to be used for a long period of time, remove the
batteries from the battery compartment (acid may leak from used
batteries and damage the device). Put the device and accesso-
ries in carrying box and keep it in cool dry place.
6. The packed EMS device should be stored and transported under
the temperature range of -20
20% ~ 95%, Atmosphere pressure 500hPa ~ 1060hPa.
Chapter 14 : SAFETY-TECHNICAL CONTROLS
For safety reasons, check your MED-FIT 1 each week based on
the following checklist.
1. Check the device for external damage.
- deformation of the housing.
- damaged or defective output sockets.
2. Check the device for defective operating elements.
- legibility of inscriptions and labels.
- make sure the inscriptions and labels are not distorted.
3. Check Led
- led must be illuminated when switched on.
4. Check the usability of accessories.
- patient cable undamaged.
- electrodes undamaged.
Please consult your distributor if there are any problems with device
and accessories.
~ + 60 , relative humidity
°C °C
16
15
ice.