Med-Fit 1 Manuel D'instructions page 14

Important
1. Do not apply to broken skin.
2. The electrodes should be discarded when they no longer adhere.
3. The electrodes are intended for single patient use only.
4. If irritation occurs, discontinue use and consult your clinician.
5. Read the instruction for use of self-adhesive electrodes before
application.
Chapter 11 : ADJUSTING THE CONTROLS
1. Slide Cover :
A sliding panel covers the controls for Pulse Width, Pulse Rate,
Mode Selector and Modulation Selector. Take advice from your
clinician regarding the settings and then leave the cover in place.
2. Display LED
The LED corresponding to the appropriate channel will light
whenever that channel is activated. At low frequencies each
individual pulse may be observed but at frequencies above 30 Hz
the LED will appear to be constantly illuminated.
11
11