Publicité
Les langues disponibles
Les langues disponibles
8.4
Adjust Earpiece Volume
There are 3 levels of earpiece volume.
During a call, press
>The current setting is shown.
>When you end the call, the setting will remain at the last selected level.
8.5
Adjust Speaker Volume
There are 5 levels of speaker volume.
During a call, press
>The current setting is shown.
>When you end the call, the setting will remain at the last selected level.
8.6
Mute/Unmute the Microphone
When the microphone is muted, the handset displays "MUTE ON", and your caller cannot hear you.
During a call, press
8.7
Paging
The paging feature enables you to locate a missing handset if the handset is in range and contains
charged batteries.
under the base unit.
Press
>All the registered handsets that are in range will start to ring.
You can stop the paging by pressing any key on the handset or the
8.8
Switching the Handset On/Off
Press and hold
for more than 2 seconds to switch the handset on or off in standby mode.
>The display will show "SEARCHING..." until the handset finds the base.
Note:
You can switch the handset off to save battery life, if the handset is not on the base or a charger pod
and you do not want to use it for a while.
IMPORTANT:
When the handset is OFF, it cannot be used for making calls including emergency calls. It will not ring
when there is an incoming call. To answer a call, you will need to switch it back on and it may take some
time for the handset to re-establish a radio link with the base unit.
8.9
To Lock/Unlock the Keypad
You can lock the keypad to avoid making calls or pressing the keys accidentally.
In standby mode, press and hold
>The handset displays "KEYS LOCKED".
To turn the keypad lock off, press and hold
Note:
Incoming calls can still be answered even if the keypad is locked.
to select from "VOLUME 1" to "VOLUME 3".
to select from "VOLUME 1" to "VOLUME 5".
to turn on/off the microphone.
key for 2 seconds to lock the keypad.
under the base unit again.
again.
9
Publicité
