Safety Device - Warm Tech CAC20KW Instructions D'origine

Canon a chaleur diesel
Masquer les pouces Voir aussi pour CAC20KW:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

◆ When there is some fuel (kerosene or diesel) in the tank
Attention
1、 Only check the appliance after flameout and removal of the power plug from power source;
2、 Before the ignition make sure there is no oil leakage, when oil leaks please don't use the appliance
and contact your dealer;
3、please check the fuel tank interior, clean the tank if there is water and waste in the tank.
【Operation】
Warning by ignition:
1、 check the fuel tank and make sure there is enough fuel in it;
2、 do not close your face near the heating part after the ignition, keep the safe distance, min. 3 meter
front from hot air outlet,top 2 meter, left and right side more than 2 meter.(see under figure)
3、 stop using the appliance when there is smoke or strange odor omitted;
4、 make sure the heater is ignited before you leave it.
Safety clearances
Ignition:insert the plug in the socket,put the power switch to position"1", the indicator lights up, It
would ignite automatically when the setting temperature is higher than ambient temperature in LED
digital temperature display.
Attention: while the heater is operating, never let the floor ground overheats to prevent causing fire.
◆ Flameout
Pay attention 1、when you shut off the heater, make sure the flame is out before you left the appliance.
2、Put the power switch to position"0" waitting fan stop working and the indicator
extinguishes, then remove the plug from the socket.

safety device

A. Fuel tank cap B. Fuel gauge
29

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Cac30kw

Table des Matières