Low Battery Indication:
Battery:
Fuses:
Operating Temperature:
Storage Temperature:
Operating Humidity:
Storage Humidity:
Operating Altitude:
Weight:
Size :
Safety:
Instrument Description
1 - 40,000 count LCD display
2 - REL button
3 - RANGE button
4 - MODE button
5 - Function switch
6 - mA, μA and 10A input jacks
7 - COM input jack
8 - Positive input jack
9 - HOLD and
10 - PEAK button
11 - MAX/MIN button
Note: Tilt stand and battery compartment are on back of unit.
is displayed if battery voltage drops below
operating voltage
One 9 volt (NEDA 1604) battery
mA, μA ranges; 0.5A/1000V ceramic fast blow
A range; 10A/1000V ceramic fast blow
41ºF to 104ºF (5ºC to 40ºC)
-4ºF to 140ºF (-20ºC to 60ºC)
Max 80% up to 87ºF (31ºC) decreasing linearly
to 50% at 104ºF (40ºC)
<80%
7000ft. (2000 meters) maximum
0.753lb (342g) includind holster
7.36" x 3.2" x 2.0" (187 x 81 x 50mm)
(includes holster)
This meter is intended for origin of installation
use and protected, against the users, by double
insulation per EN61010-1 and IEC61010-1 2nd
Edition (2001) to Category IV 600V & Category
III 1000V; Pollution Degree 2. The meter
also meets UL 61010-1, 2nd Edition (2004),
CAN/CSA C22.2 No. 61010-1 2nd Edition
(2004), & UL 61010B-2-031, 1st Edition (2003)
(Backlight) button
reedinstruments
www
com
8