Publicité
Les langues disponibles
Les langues disponibles
% 4 – 20mA Measurement
1. Set up and connect as described for DC mA measurements
2. Set the rotary function switch to the 4-20mA% position
3. The meter will display loop current as a % with 0mA=-25%, 4mA=0%,
20mA=100%, and 24mA=125%
Autoranging/Manual Range Selection
When the meter is first turned on, it automatically goes into AutoRanging.
This automatically selects the best range for the measurements being
made and is generally the best mode for most measurements.
For measurement situations requiring that a range be manually selected,
perform the following:
1. Press the RANGE key. The "AUTO" display indicator will turn off
2. Press the RANGE key to step through the available ranges until you
select the range you want
3. To exit the Manual Ranging mode and return to Autoranging, press and
hold the RANGE key for 2 seconds
Note: Manual ranging does not apply for the Temperature functions.
Max/Min
1. Press the MAX/MIN key to activate the MAX/MIN recording mode.
The display icon "MAX" will appear. The meter will display and hold the
maximum reading and will update only when a new "max" occurs
2. Press the MAX/MIN key again and the display icon "MIN" will appear.
The meter will display and hold the minimum reading and will update
only when a new "min" occurs
3. To exit MAX/MIN mode press and hold the MAX/MIN key for 2 seconds
reedinstruments
www
continued ...
com
15
Publicité
