EcoFlow RIVER mini Guide De Prise En Main page 8

Getting Started
1. Product On, Product O
Short press the Main Power Button to turn on the product; the LCD Screen will light
up and the battery level indicator icon will display.To power o the product, press
and hold the Main Power Button. Note that the product will not turn o if it's
connected to any power source.
2. USB Output Port
With the Main Power Button turned on, short press the USB Power Button to use
the USB Output Port (USB-C Output/USB-A Output/Wireless Output). Short press
the USB Power Button again to turn it o .
3. 12V Car Output Port
With the Main Power Button turned on, short press the 12V Car Power Button to
use the 12V Car Output port. Short press the 12V Car Power Button again to turn it
o .
4. AC Output Sockets
With the Main Power Button turned on, short press the AC Power Button to use the
AC Output Sockets. Short press the AC Power Button again to turn it o .
5. APP Control
In the power-on state, the output power switch can be controlled through the App,
and the maximum charging capacity and the key tone can also be set.
Warning:
If
operation by removing the electrical device connected to the product.
If flashes with other icons, After the product cools down, it will
resume normal operation automatically.
If flashes with other icons, The power supply can be resumed
automatically after the battery temperature rises above 10.4°F.
If an errors(s) is indicated on the LCD screen during use and does not
disappear after a restart, please stop using the product immediately (do
not try to charge or discharge).
If you require any other assitance, please contact EcoFlow Customer
Service at support@ecoflow.com.
flashes with other icons, Product can be resumed to normal
5